Vision Plumbing & Heating
VISIONPLUMBING & HEATING

Our Work

Real before & after photos from jobs across Essex & East London.

Underfloor Heating Installation — Open-Plan Extension

A full wet underfloor heating system for a large open-plan extension. Every pipe loop laid and spaced by hand in aluminium heat-spreader plates, pressure-tested, then locked in with a liquid screed for even, wall-to-wall warmth. No radiators, no cold spots — and lower running costs for years to come.

Underfloor heating pipe loops laid in aluminium spreader plates across an open-plan room
Pipework
Underfloor heating pipe runs laid across multiple rooms before screed
Pipework
Underfloor heating manifold with protective cover and pipe loops feeding into the floor
Manifold
Multi-zone underfloor heating manifold with actuators and wiring centre on the wall
Manifold
Liquid screed poured over the underfloor heating pipework
Screed
Finished screeded floor over the completed underfloor heating system
Completed

New Vaillant ecoFIT Boiler Installation

A new Vaillant ecoFIT system boiler installed with clean copper pipework, a magnetic system filter to protect it from sludge, and a full flue-gas analysis on commissioning to confirm it's burning safely and efficiently. Done properly, start to finish.

New Vaillant ecoFIT boiler wall-mounted with copper pipework and magnetic filter
Installed
Vaillant boiler being commissioned with a flue gas analyser to check combustion
Commissioning

Boiler Replacement — High-Efficiency Vaillant

An older, tired boiler swapped out for a new high-efficiency Vaillant. New boilers run at over 90% efficiency compared with 70% or worse on ageing units — real savings on the bills every month, plus clean pipework and modern controls built to last.

Older Vaillant boiler with dated pipework and header tank before replacement
Before
New high-efficiency Vaillant boiler installed with clean pipework
After

Plant Room Installation — System Boiler & Unvented Cylinder

Full plant room fit-out in a loft conversion. Vaillant system boiler with Stelfflow unvented hot water cylinder, complete copper pipework, expansion vessel, and controls.

Empty plant room before installation
Before
Vaillant system boiler and Stelfflow unvented cylinder installed
After
Completed plant room with full copper pipework
Completed

Boiler Change — Vaillant Combi Replacement

Out with the old, in with the new. Full boiler swap in a cupboard space — old Vaillant removed, new Vaillant combi installed with clean copper pipework throughout.

Old Vaillant boiler before replacement
Before
Cupboard stripped ready for new boiler with flue plate fitted
During
New Vaillant combi boiler installed with clean copper pipework
After

Boiler Change with Condensate Pump

Old Vaillant combi replaced with a new Vaillant ecoFIT. Condensate pump installed for clean waste routing where gravity drainage wasn't possible.

Old Vaillant boiler in cupboard before replacement
Before
New Vaillant boiler installed with condensate pump and copper pipework
After

New Boiler Installation with Toilet & Basin Unit

Complete room transformation — new Vaillant boiler installed with full copper pipework, plus a toilet and basin unit fitted. Walls boarded, floor tiled, room completely modernised.

Bare brick room with wall plate and flue hole ready for boiler
Before
New Vaillant boiler mounted with copper pipework run
During
Finished room with Vaillant boiler, toilet and basin unit, tiled floor
After

System Boiler & Cylinder Replaced with Combi

Old Main system boiler and unvented cylinder removed — replaced with a Vaillant combi boiler, freeing up cupboard space. Full copper pipework and gas run.

Old Main system boiler sat on top of unvented cylinder in cupboard
Before
New Vaillant combi boiler with clean copper pipework, cylinder removed
After

Vented Cylinder Replaced with Unvented Cylinder & Electric Boiler

Old vented cylinder stripped out and replaced with a modern Tempest unvented hot water cylinder, complemented by a new Potterton electric boiler for the central heating system. Full copper pipework, expansion vessel, and controls.

Old vented cylinder in airing cupboard before removal
Before
New Tempest unvented cylinder installed with copper pipework
After
Potterton electric boiler mounted alongside unvented cylinder
After

Ready to Get Started?

Whether you need a new boiler, a repair, or just an annual service — we're here to help.

📞 Call Now💬 WhatsApp